 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| hsu-07hc03/r2 hsu-09hc03/r2 hsu-12hc03/r2 hsu-14hb03/r2 hsu-18hb03/r2 hsu-22hb03/r2 h2sm-14hb03/r2 h2sm-18hb03/r2 no.0010552407 hsu-22hc03/r2 hsu-22hd03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 hsu-14hr03/r2 hsu-18hr03/r2 free datasheet http:///
ce tutti i prodotti sono conformi alle seguenti normative europee: - direttiva 73/23/eec basso voltaggio - dir ettiva 89/336/eec compatibilit elettr omagnetica rohs il prodotto conforme alla normativa 2002/95/eec sulla restrizione d?uso di sostanze inquinanti negli apparecchi elet- trici ed elettronici. weee informativa al consumatore come previsto dalla normativa europea 2002/96/ce riguardante i rifiuti di apparecchiature elettriche ed elettroniche. specifiche di smaltimento: il climatizzatore contrassegnato con que- sto simbolo, ci significa che i prodotti elet- trici ed elettronici non possono essere smaltiti insieme ai rifiuti domestici non diffe- renziati. non cercare di demolire il sistema da soli: la demolizioni dei sistemi di condiziona- mento, nonch il recupero del refrigerante, dell?olio e di qual- siasi altra parte devono essere eseguiti da un installatore qua- lificato in conformit alla legislazione locale e nazionale vigen- te in materia.i climatizzatori devo essere trattati presso una struttura specializzata nel riutilizzo, riciclaggio e recupero dei materiali. il corretto smaltimento del prodotto eviter le possi- bili conseguenze negative all?ambiente e alla salute dell?uo- mo. per maggiori informazioni contattare l?installatore o le autorit locali. le batterie devono essere tolte dal telecoman- do e smaltite separatamente conformemente alla legislazione locale e nazionale vigente in materia. conformit alle direttive europee per i modelli: it ce all the products are in conformity with the following european provision: - low voltage directive 73/23/eec - electr omagnetic compatibility 89/336/eec rohs the products are fulfilled with the requirements in the directive 2002/95/eec of the european parliament and of the council on the restriction of the use of certain hazardous sub- stances in electrical and electronic equipment (eu rohs directive). weee in accordance with the directive 2002/96/ce of the european parliament, herewith we inform the consumer about the dis- posal requirements of the electrical and electronic products disposal requirements: your air conditioning product is marked with this symbol. this means that electrical and electronic products shall not be mixed with unsorted household waste. do not try to dismantle the system yourself: the dismantling of the air conditioning sys- tem, treatment of the refrigerant, of oil and of other part must be done by a qualified installer in accor- dance with relevant local and national legislation. air conditioners must be treated at a specialized treatment facility for re-use, recycling and recovery. by ensuring this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health. please contact the installer or local authority for more information. battery must be removed from the remote controller and dis- posed of separately in accordance with relevant local and national legislation. european regulations conformity for the models: en - direttiva basso voltaggio /ec 20 0 /95 6 - low voltage directive /ec 200 /95 6 hsu-07hc03/r2 hsu-09hc03/r2 hsu-12hc03/r2 hsu-14hb03/r2 hsu-14hr03/r2 hsu-18hb03/r2 hsu-22hb03/r2 hsu-22hc03/r2 hsu-22hd03/r2 hsu-18hr03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 h2sm-14hb03/r2 h2sm-18hb03/r2 hsu-07hc03/r2 hsu-09hc03/r2 hsu-12hc03/r2 hsu-14hb03/r2 hsu-14hr03/r2 hsu-18hb03/r2 hsu-22hb03/r2 hsu-22hc03/r2 hsu-22hd03/r2 hsu-18hr03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 h2sm-14hb03/r2 h2sm-18hb03/r2 - direttiva compatibilit elettr omagnetica 8 /ec 200 / ?? 8 /ec 200 / ?? - electromagnetic compatibility 4 4 ce tous les produits sont conformes aux directives europennes suivantes: - directive 73/23/cee basse tension - directive 89/336/cee compatibilit lectromagntique rohs l'appareil est conforme la directive 2002/95/cee relative la limitation de l'utilisation de certains substances dangereu- ses dans les quipements lectriques et lectroniques. deee (weee) information au consommateur comme le prvoit la directive europenne 2002/96/ce relative aux dchets d'quipements lectriques et lectroniques. specifications pour l'elimination: ce pictogramme, appos sur le climatiseur, signifie que les quipements lectriques et lectroniques ne peuvent pas tre limins avec les dchets mnagers non tris. ne pas essayer de dmanteler l'quipe- ment soi-mme: le dmantlement des systmes de climatisation, ainsi que la rcu- pration du frigorigne, de l'huile et de toute autre partie doi- vent tre effectus par un installateur qualifi conformment la lgislation locale et nationale en vigueur en la matire. les climatiseurs doivent tre traits dans un centre spcialis dans la rutilisation, le recyclage et la valorisation des matriaux. l'limination correcte de ces appareils permet d'viter les effets nocifs sur l'environnement et la sant humaine. pour plus de renseignements contacter l'installateur ou les autorits locales. les piles doivent tre retires de la tl- commande et limines sparment, conformment la lgislation locale et nationale en vigueur en la matire. conformit aux directives europennes pour les modles: fr ce alle produkte erfllen die folgenden europ?ischen richtlinien: - niederspannungsrichtlinie 73/23/ewg - emv-richtlinie 89/336/ewg rohs das produkt erfllt die richtlinie 2002/95/ewg zur beschr?n- kung der verwendung bestimmter gef?hrlicher stoffe in elektro- und elektronikger?ten. weee verbraucherinformation laut europ?ischer richtlinie 2002/96/eg zu elektro- und elektronik-altger?ten. hinweise zur entsorgung : das klimager?t ist mit diesem symbol gekennzeichnet, das darauf hinweist, dass elektro- und elektronikger?te getrennt vom hausmll entsorgt werden mssen. verschrotten sie die anlage nicht selbst: die verschrottung von klimaanlagen, sowie die rckgewinnung des k?ltemittels, des ?ls und aller sonstigen teile mssen durch einen qualifizierten installateur in bereinstimmung mit den einschl?gigen gelten- den ?rtlichen und nationalen vorschriften erfolgen. die klima- ger?te mssen bei einem unternehmen entsorgt werden, das auf die verwertung, das recycling und die rckgewinnung der materialien spezialisiert ist. die richtige entsorgung des produkts hilft negative auswirkungen auf umwelt und gesundheit zu vermeiden. fr weitere informationen wenden sie sich bitte an den installateur oder die ?rtlichen beh?rden. die batterien mssen aus der fernbedienung entfernt und in bereinstimmung mit den einschl?gigen geltenden ?rtlichen und nationalen vorschriften getrennt entsorgt werden. bereinstimmung mit den europ?ischen richtlinien fr die modelle: de - dir ective basse tension / 200 /95 6 ce - niederspannungsrichtlinie e g / 200 /95 6 hsu-07hc03/r2 hsu-09hc03/r2 hsu-12hc03/r2 hsu-14hb03/r2 hsu-14hr03/r2 hsu-18hb03/r2 hsu-22hb03/r2 hsu-22hc03/r2 hsu-22hd03/r2 hsu-18hr03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 h2sm-14hb03/r2 h2sm-18hb03/r2 hsu-07hc03/r2 hsu-09hc03/r2 hsu-12hc03/r2 hsu-14hb03/r2 hsu-14hr03/r2 hsu-18hb03/r2 hsu-22hb03/r2 hsu-22hc03/r2 hsu-22hd03/r2 hsu-18hr03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 h2sm-14hb03/r2 h2sm-18hb03/r2 8 / 200 / ?? 8 / 200 / ?? - dir ective ce compatibilit lectr omagntique - emv -richtlinie e g 4 4 split type room air conditioner operation manual please read this operation manual before using the air conditioner. hsu-14hr03/r2 hsu-18hr03/r2 before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. unplug the air conditioner in order to avoid the risk of child entrapment. it must be noticed that air conditioner system contains refrigerants, which require speciali- zed waste disposal. the valuable materials contained in an air conditioner can be recycled. contact your local waste disposal center for proper disposal of an old air conditioner and contact your local authority or your dealer if you have any question. please ensure that the pipework of your air conditioner does not get damagedprior to being picked up by the relevant waste disposal center, and contribute to environmental awareness by insisting on an appropriate, anti-pollution method of disposal. disposal of the old air conditioner all these valuable materials may be taken to a waste collecting center and used again after adequate recycling. consult your local authorities for the name and address of the waste materials collecting centers and waste paper disposal services nearest to your house. disposal of the packaging of your new air conditioner safety instructions and warnings 1 cautions all the packaging materials employed in the package of your new air conditioner may be disposed without any danger to the environment. the cardboard box may be broken or cut into smaller pieces and given to a waste paper disposal service. the wrapping bag made of polyethylene and the polyethylene foam pads contain no fluorochloric hydrocarbon. before starting the air conditioner, read the information given in the user's guide caref- ully. the user's guide contains very impor- tant observations relating to the assembly, operation and maintenance of the air conditioner. the manufacturer does not accept respon- sibility for any damages that may arise due to non-observation of the following instruction. damaged air conditioners are not to be put into operation. in case of doubt, consult your supplier. use of the air conditioner is to be carried out in strict compliance with the relative instructions set forth in the user's guide. installation shall be done by professional people, don't install unit by yourself. for the purpose of the safety,the air con- ditioner must be properly grounded in acco- rdance with specifications. always remember to unplug the air conditioner before openning inlet grill. never unplug your air conditioner by pulling on the power cord. always grip plug firmly and pull straight out from the outlet. all electrical repairs must be carried out by qualified electricians. inadequate repairs may result in a major source of danger for the user of the air conditioner. do not damage any parts of the air conditioner that carry refrigerant by piercing or perforating the air conditioner's tubes with sharp or pointed items, crushing or twisting any tubes, or scraping the coatings off the surfaces. if the refrigerant spurts out and gets into eyes, it may result in serious eye injuries. cautions do not obstruct or cover the ventilation grille of the air conditoner.do not put fingers or any other things into the inlet/outlet and swing louver. do not allow children to play with the air conditioner.in no case should children be allowed to sit on the outdoor unit. the refrigerating circuit is leak-proof. remark per emc directive 89/336/eec. to prevent flicker impression during the start of the compressor(technical process) and the adversely influence caused by the 2nd harmonies of compressor following installation conditions do apply: 1.the power connection for air conditioner has to be done at the main power distribution.this distribution has to be of a iow impedance. normally the required impedance is reached at a 32a fusing point. 2.no other equipment has to be connected: to this power line. 3.for the details installation acceptance please refer to your contract with the power supplier, if restrictions do apply for products: like washing machines,air conditioners or electrical ovens. 4.for the details of the power of air, conditioner, please refer to the rating plate of the product. 5.for any question contact your local dealer. specifications 2 hsu-07hc 03/r2 hsu-09hc 03/r2 hsu-12hc03/r2 indoor unit parts and functions for models: hsu-14hb03/r2 hsu-18hb03/r2 h2sm-14hb03/r2 h2sm-18hb03/r2 for multi-split type, the power plug is on the outdoor unit. 3 inlet grille air filter(inside) vertical flap use remote controller to adjust up and down air flow. (don't adjust it manually.) remote signal receiver a beeping sound is generated when a signal from remote controller is received. operation mode indicator lights up during compressor running. timer mode indicator lights up when timer operation is selected. power indicator lights up when unit starts. hsu-22hb03/r2 for models: hsu-22hc03/r2 inlet grille air filter vertical flap use remote controller to adjust up and down air flow. (don't adjust it manually.) power indicator lights up when unit starts. timer mode indicator lights up when timer operation is selected. operation mode indicator remote signal receiver emergency switch(manual) test running switch(manual) lights up during compressor running. a beeping sound is generated when a signal from remote controller is received. used when remote controller is lost or defective. unit will run temporarily. used only for test running in cooling when room temp. is below 16oc. don't use it in normal operation. actual inlet grille may vary from the one shown in the manual according to the product purchased hsu-22hd03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 hsu-14hr 03/r2 hsu-18hr03/r2 hsu-07hc03/r2 hsu-09hc03/r2 parts and functions outdoor unit for models: cooling indoor maximum:d.b/w.b 32oc/23oc 24oc/18oc -7oc/-8oc 43oc/26oc 18oc 27oc 15oc 18oc/14oc maximum:d.b/w.b minimum:d.b maximum:d.b minimum:d.b minimum:d.b/w.b maximum:d.b/w.b minimum:d.b/w.b outdoor indoor outdoor heating outlet connecting piping and electrical wiring inlet drain hose 2. if the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. the type of connecting wire is h05rn-f or h07rn-f. 3. if the fuse on pc board is broken please change it with the type of t.3.15a/250v. 4. the distance between the indoor unit and the floor should be more than 2m. 5. the wiring method should be in line with the local wiring standard. 6. after installation, the power plug should be easily reached. 7. the waste battery should be disposed properly. 8. the appliance is not intended to use by young children or infirm persons without supervision 9.young children should be supervised ensure that they do not play with the appliance. 10.the appliance must be installed on strong enough supporter. 11 .the wiring diagram is attached inside the machine. the machine is adaptive in following situation 1. applicable ambient temperature range: 4 for models: hsu-12hc03/r2 for models: hsu-18hb03/r2 for models: hsu-22hb03/r2 for models: h2sm-14hb03/r2 h2sm-18hb03/r2 parts and functions 5 hsu-22hc03/r2 hsu-14hb03/r2 hsu-22hd03/r2 h2sm-14hc03/r2 h2sm-18hc03/r2 hsu-14hr03/r2 hsu-18hr03/r2 6 hints after replacing with new batteries, remote controller will conduct self-check, displaying all information on lcd. then, it will become normal. buttons and display of the remote controller. parts and functions 1.mode display auto cool dry heat fan 2. swing display 3. fan speed display 4. health display 5. sleep display 6. lock display 7. timer on display 8. auxiliary heat display 9. health 10. mode used to select auto,cool,dry,heat and fan 11. clock used to set correct time 12. timer used to select timer on,timer off 13. reset used to reset the controller back to normal condition. 14. code used to select code a or b with a press,a or b will be displayed on lcd.please select a without special explanation 15. code display 16. signal sending display 17. power/soft display 18. temp. display 19. clock display 20. timer off display 21. temp used to select your desired temperature 22. fan used to select fan speed 23. power on/off used for unit start or stop 24. sleep used to select sleep mode low med hi auto 25. swing 26. set used to confirm timer and clock settings 27. hour used to set clock and timer settings note:(1)the following functions and related displays are not available: auxiliary heat display, power/soft display, lock display. (2)if the air conditioner don't have the function of the code ,press code b can cause it not available. (3)cooling only unit do not have functions and displays related with heating. clock set when unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: press clock button, "am" or "pm" flashes. press or to set correct time. each press will increase or decrease 1min. if the button is kept depressed, time will change quickly. after time setting is confirmed, press set, "am "and "pm" stop flashing, while clock starts working. 7 hints after replacing with new batteries, remote controller will conduct self-check, displaying all information on lcd. then, it will become normal. clock set when unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: press clock button, "am" or "pm" flashes. press or to set correct time. each press will increase or decrease 1min. if the button is kept depressed, time will change quickly. after time setting is confirmed, press set, "am "and "pm" stop flashing, while clock starts working. note:(1)the following functions and related displays are not available: auxiliary heat display, power/soft display,health display. (2)if the air conditioner don't have the function of the code ,press code b can cause it not available. (3)cooling only unit do not have functions and displays related with heating. buttons and display of the remote controller. parts and functions if the unit which you purchased has not health function, remote controller should like the following figure: 1.mode display auto cool dry heat fan 2. swing display 3. fan speed display 4. health display 5. sleep display 6. lock display 7. timer on display 8. auxiliary heat display 9. swing 10. mode used to select auto,cool and fan 11. clock used to set correct time 12. timer used to select timer on,timer off 13. reset used to reset the controller back to normal condition. 14. code used to select code a or b with a press,a or b will be displayed on lcd.please select a without special explanation 15. code display 16. signal sending display 17. power/soft display 18. temp. display 19. clock display 20. timer off display 21. temp used to select your desired temperature 22. fan used to select fan speed 23. power on/off used for unit start or stop 24. sleep used to select sleep mode low med hi auto 25. set used to confirm timer and clock settings 26. hour used to set clock and timer settings 27.lock used to lock buttons and lcd display. 8 operation when in use, put the signal transmission head directly to the receiver hole on the indoor unit. the distance between the signal transmission head and the receiver hole should be within 7 m without any obstacle as well. don't throw the controller, prevent it from being damaged. when electronic-started type fluorescent lamp or change-over type fluorescent lamp or wireless telephone is installed in the room, the receiver is apt to be disturbed in receivering the signals so the distance to the indoor unit should be shorter. loading of the battery load the batteries as illustrated. 2 r-03 batteries, resetting key (cylinder) remove the battery cover: slightly press " " and push down the cover. load the battery: be sure that the loading is in line with the" + "/"-" pole request as illustrated. put on the cover again confirmation indicator: in disorderation, reload the batteries or load the new batteries after 6 mins. note: use two new same-typed batteries when loading. if the remote controller can't run normally or doesn't work at all, use a sharp pointed item to press the reset key. hint: remove the batteries in case unit won't be in usage for a long period. if there are any display after taking-out just need to press reset key. power failure resume(please set and apply as necessary) if sudden power failure occurs, the unit will resume original operation when power is supplied again. note: when sudden power failure happens during unit operation in power failure resume mode, if the air conditioner is not desired for use in a long period, please shut off the power supply in case that the unit automatically resume operation when power is re-supplied, or press on/off to turn off the unit when power resumes. remote controller's operation 9 operation (4) unit stop (1) unit start mode changes as follows: press on/off button, unit starts. previous operation status appears on display. (not timer setting) power indicator on indoor unit lights up. (2) select operation mode press mode button. for each press, operation auto cool dry heat fan unit will run in selected mode. stop display at " " auto or " "fan. (3) fan press fan button. for each press, fan speed changes as follows: unit will run at selected fan speed. note:auto is not available in fan mode. press on/off button. only time remains on lcd. all indicators on indoor unit go out. vertical flap closed automatically. hints remote controller can memorize settings in each operation mode. to run it next time just select the operation mode and it will start with the previous setting. no reselecting is needed.(timer on/off needs reselecting) cautions: note: on cooling only unit, heating mode is not available, the above information is the after replacing batteries, press on/off, and display explanation of the displayed becomes as follows: information therefore varies operation mode: auto, temp. no with those displayed in actual timer mode: no, fan speed :auto operation. auto run, fan operation enjoy yourself by just a gentle press. lo med hi auto operation press mode button. for each press, operation recommendations: 10 cool,heat and dry operation use cool in summer. use heat in winter use dry in spring, autumn and in damp climate. (1) unit start mode changes as follows: press on/off button, unit starts. previous operation status appears on display. (not timer setting) power indicator on indoor unit lights up. (2) select operation mode auto cool dry heat fan unit will run in operation mode displayed on lcd. stop display at your desired mode. (3) select temp. setting press temp button. every time the button is pressed, temp. setting increases 1oc every time the button is pressed, temp. setting decreases 1oc unit will start running to reach the temp. setting on lcd. press fan button. for each press, fan speed changes (4) fan speed selection as follows: just press on/off button and unit will run in previous status. unit runs at the speed displayed on lcd. hints on cooling only unit, heating mode is not available. remote controller can memorize each operation status. when starting it next time, cool operation starts when room temp. is higher than temp. setting. ultra-low air flow temp. setting+2oc temp. setting on reaching temp. setting, unit will run in mild dry mode. lo med hi auto in heat mode,warm air will blow out after a short period of time due to cold-draft prevention function. in dry mode, when room temp. becomes 2oc higher than temp. setting, unit will run intermittently at lo speed regardless of fan setting. 11 (5) air flow direction adjustment after operation mode is selected, vertical flap will open automatically according to the mode. referring to the fig. cool heat cool heat about 10o about 60o about 10o about 45o about 60o better set a temp. difference of 3-5 c between indoor and outdoor temp. in cool mode. hints as cold air flows downward in cool mode, adjusting air flow horizontally will be much more helpful for a better air circulation. as warm air flows upward in heat mode, adjusting air flow downward will be much more helpful for a better air circulation. be careful not to catch a cold when cold air blows downward. it is harmful to your health in summer to go frequently in and out of places where temp. difference is above 7oc. temp. difference of 3-5oc will remove your fatigue. more than this, unit's load can be reduced and power consumption cut down as well. so, you'd (6) unit stop press on/off button. only time remains on lcd. all indicators on indoor unit go out. vertical flap closes automatically. cautions: unit won't restart until 3 minutes have elapsed, due to system protection. heat mode is not available on cooling only unit. it is advisable not to keep vertical flap at downward position for a long time in cool or dry mode, otherwise, condensate water might occur. cautions: cautions: when humidity is high, condensate water might occur at air outlet if all horizontal louvers are adjusted to left or right. move the horizontal blade by a knob on air conditioner to adjust left and right direction referring to fig. left and right air flow adjustment (manual) press swing button, vertical flap will move within the range shown in the fig. press swing button stop it at a fixed position. up and down (use remote controller) operation 12 operation timer operation you can let unit start or stop automatically at following times: before you wake up in the morning, or get back from outside or after you fall asleep at night. set clock correctly before starting timer operation timer on/off power indicator on indoor unit lights up. (1)after unit start, select your desired operation mode. operation mode will be displayed on lcd. (2)timer mode selection press timer button to change timer mode. every time the button is pressed, display changes as follows: on off on off timer on timer off timer on-off blank select your desired timer mode (timer on or timer off) on or off will flash. (3)timer setting press hour / button. every time the button is pressed, time increases 10 min. if button is kept depressed, time will change quickly. every time the button is pressed, time decreases 10 min. if button is kept depressed, time will change quickly. time will be shown on lcd. it can be adjusted within 24 hours. timer mode indicator on indoor unit lights up. (4)confirming your setting after setting correct time, press set button to confirm, "on" or "off" stops flashing time displayed: unit starts or stops at x hour x min. (timer on or timer off). to cancel timer mode just press timer button several times until timer mode disappears. hints after replacing batteries or a power failure happens, time setting should be reset. remote controller possesses memory function, when use timer mode next time, just press set button after mode selecting if timer setting is the same as previous one. 13 timer on-off timer on-off to cancel timer mode power indicator on indoor unit lights up. (1)after unit start, select your desired operation mode. operation mode will be displayed on lcd. on off on off timer on timer off timer on-off blank every time the button is pressed, display changes as follows: (2) press timer button to change timer mode. select timer on-off. "on" will flash. (3)time setting for timer on if button is kept depressed, time will change quickly. every time the button is pressed, time decreases 10 min. if button is kept depressed, time will change quickly. every time the button is pressed, time increases 10 min. it can be adjusted within 24 hours. time will be shown on lcd. am refers to morning and pm to afternoon press hour button. (4) time confirming for timer on after time setting, press timer button to confirm. "on" stops blinking, while "off" starts blinking. time displayed: unit starts at x hour x min. (5)time setting for timer off follow the same procedures in "time setting for timer on". (6) time confirming for timer off after time setting, press set button to confirm, "off" stops flashing time displayed: unit stops at x hour x min. just press timer button several times until timer mode disappears. operation 14 operation health mode operation (1) press the on/off switch. (2) press the "health" once," " is displayed, now the air conditioner is operating the health function. (3) press the "health"again,then the health function stops. the anion generator in the air conditioner can generate a lot of anion to effectively balance the quantity of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room and finally clean the air in the room. brief introduction to health operation pi pi...pi 15 emergency and test operation use this operation only when the remote controller is defective or lost. when the emergency operation switch is pressed,the" pi "sound is heard once, which means the start of this operation. in this operation, it is possible to change the settings of temperature and air flow speed, it is also impossible to do an operation by the timer. operation emergency operation: follow the requirements below. room temperature designated temperature timer mode air flow speed operation mode more than 23oc less than 23oc 23oc 26oc continuous continuous auto auto cool heat if an air conditioner is a model for both cooling and heating. cooling when the room temperature at the start of operation is above 23oc. temperature is less 16oc, do not use it in the normal use this switch in the test operation when the room operation. operation starts with the air flow speed setting "hi". continue to press the test operation switch for more than 5 seconds. after you hear the "pi" sound twice, release your finger from the switch, the cooling removal of the restriction of emergency or test operation: press once more the emergency operation switch, or manipulate through the remote controller, a "pi" sound causes the restriction of emergency or test operation to be removed. when the remote controller is manipulated for the removal, then the selected operation by the remote controller. heating when the room temperature at the start of operation is below 23oc test operation: 16 comfortable sleep operation in cool mode sleep in selected mode. before going to bed at night, you can simply press the sleep button and unit will bring you a sound one hour after sleep mode starts, temp. will become 1oc higher than temp. setting. after running for another 1 hour, temp. rises by 1oc further. unit will run for 6 hours then stops automatically. temp. is higher than temp. setting so that room temp. won't be too iow for your sleep.(as shown in fig.l) in heat mode (as shown in fig .2) one hour after sleep mode starts, temp. will become 2oc lower than temp. setting. after running for another 1 hour, temp. decreases by 2oc further. unit will run for 3 hours at this temp. then increases another 1oc and stops automatically 3 hours later. temp. is lower than temp. setting so that room temp. won't be too high for your sleep. power failure resume function with the indicator lighting up. if the unit is started for the first time, the compressor will not start running unless 3 minutes have elapsed. when the power resumes after power failure, the unit will run automatically, the power indicator lights up, and 3 minutes later the compressor starts running note: in auto mode, unit will run in sleep function according to operation mode. in fan mode, comfortable sleep is not available. sleep operation starts sleep operation stops approx. 6 hrs 1 hr 1 hr rises 1oc rises 1oc temp. setting unit stop temp. setting unit stop decreases 2oc decreases 2oc approx. 3 hrs 1 hr 1 hr rises 1oc 3 hrs sleep mode starts sleep mode stops fig.1 fig.2 17 maintenance different models have different appearance cleaning of unit casing cleaning of remote controller cleaning of air filter cut off power supply before cleaning unit casing with soft cloth. in case of heavy stain, clean it with neutral detergent. squeeze water in the cloth, wipe off the detergent on unit casing completely. don't use water to wash unit casing, please use dry cloth. don't use glass cleaner or cloth soaked with chemicals. 1.open inlet grille by pulling it upward. air filter 2.remove air filter push up the filter's center tab slightly until it is caesura of the stopper. remove it by pulling down. 3.clean the filter use a vacuum cleaner to remove dust,or wash the filter with water. after washing, dry the filter completely in the shade. 5.close the inlet grille. 4.attach the filter attach filter behind the stopper so that the "front" indication is facing to the front. make sure that it is completely behind the stopper, otherwise problems might occur. air filter air purifying filter 4 6 1 2 3 5 18 maintenance replacement of purifying filter open the inlet grille open the inlet grille by pushing each end of the inlet grille upward. detach the standard air filter slide the knob slightly upward to release the filter,then withdraw it. detach the air purifying filter replace old air purifying filter with new one into the frame. attach the air purifying filter attaching each of the air purifying filters to the indoor unit as white side face to front. for the units of 22,the purifying filter is put into the standard filter. attach the standard air filter (make sure to be attached) operating without standard air filter may cause trouble with the machine. close the inlet grille close the grille surely. the air conditioner which you are using may be different from the upper illustration, please refer to the upper installation methods. note: please replace the air purifying filter in 3-6 months as standard. stuffed filter are not usable even washing.please purchase new one at sales shop. 19 maintenance better use of air conditioner proper room temperature. cleaning of the air filter. effective use of the timer. closing of doors and windows during operation never fail to observe the followings do not sprinkle water over the unit. do not block the inlet or outlet. do not pull power plug. do not use for other purposes. such as food preservation plant cultivation or animal breeding. avoid time-wasteful operation curtains or blinds for windows proper temperature once every two weeks 20 trouble shooting before asking for service, check the following first. normal performance inspection noise is heard phenomenon cause or check points the system does not restart immediately. smells are generated. mist or steam are blown out. multiple check does not work at all. poor cooling application temp. range of air conditioner -7oc~43oc. when unit is stopped, it won't restart immediately until 3 minutes have elapsed to protect the system. when the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes to protect the air conditioner. during unit operation or at stop, a swishing or gurgling noise may be heard. at first 2-3 minutes after unit start, this noise is more noticeable. (this noise is generated by refrigerant flowing in the system.) during unit operation, a cracking noise may be heard. this noise is generated by the casing expanding or shrinking because of temperature changes should there be a big noise from air flow in unit operation, air filter may be too dirty. this is because the system circulates smells from the interior air such as the smell of furniture, cigarettes. during cool or dry operation, indoor unit may blow out mist. this is due to the sudden cooling of indoor air. is power plug inserted? is there a power failure? is fuse blown out? is the air filter dirty? normally it should be cleaned every 15 days. are there any obstacles before inlet and outlet? is temperature set correctly? are there some doors or windows left open? is there any direct sunlight through the curtain) window during the cooling operation?(use are there too much heat sources or too many people in the room during cooling operation? ! " " #!$ % ! & '( ) " #! * + (,-! ."$!) " " " ) ( -#!#! + -/ 0 ,#!0 #! " " " ) - '#! #! ! " 1+" & ( 2 ( " ! " " +! " " 3 " " " " " " 1 !+ "$ "! " " ( %,+ " "" + ( ! " " ! 4 ) " #! "!" " " * 0 #!5 "- + " " 1 ! " + , " 6! "" " " 1 6 ! 5 " 1 + + " " " 1 7 " 1 " " ( % 8 6 %! & 6 %! " " !(+! + - + 6 2 " % " 1 +! + " & *+#!0,( ! ( " " " %+ + 2 6 ( *) + , 6 #! +! + 7 " 1 6 % " " !( 8 ( +! ( !" "- ! ,( ( ! & +!5! " " % "! ! ! " 6 , "" 1 " "- ! , ( " " " % + + * " " " + "$ " " ' ) " 1#! + " 9!: ! 2 9!: ! " 6 ( " !, + " 1 " %' ! & " 1 , " " 7 ) 6 " "+ -! + 6 + 0#!+! ! - 6 "! + -! !"" 1 ; !"" -! , ( " 2 " " 0 6+ "$ 7" ! '"! + ( 2 ! & " 1 " " 6)"! "! + " !"" " + 0 9!: ! 2 " 16 )"! + + ) < ! + + + "! , - 7+" ) " " 3 & -! ' " " 6 + ! "! ") +" ) " " ( "$!) " " 6 % "$!) % * " " " 6 " 1!% + ") & "$!), 5 " " 1 " 8 + " 5" " 6 )"! + " " "! ) " 2 + " "! +! " ! ! )! + + - + !! " " 0 -! + & " " #! ( ) - + ) -!% !6 " " " ) +! -!' + " -/ !6' " " "!6 !+ ) " + !"! )!- ) - , " "" %'+!+ (" - ( "! 6 "! & + % ( " 1 " " + -/ - % #! 0%!-!" " " 7 -/" 6 + 0#! 6 ! = 7 " "! ) - " 1 + !6 )!- -/. " ( 7 > 77 3 + ! + 1 " ! #! " + ?3 " 85" "@, ) !" ( + (" + 1 " a ( " + ' + " -! " " " 1b 2 "= 1 " 1+ " " 6 & 6!" 1+ " + 7 6!" 16 6 % + " ' + " " " & ! +! 6"" -/ #! +b : 1 3 "" "! " 1 " 1'"! " " !+ ( 1+ " + 6 + " "" + !"b " ( ' " " ! $ 5" " 3 6 1 " " '"! + " " " : " + !" c3 "! #! "! 1'+1- " " " ! 6! " 3 b ! "## ! ##$% # & ' # & ! " # " $ $ % ! " ! & % '()* ! " # $ $ " ! " # $ $ " % ! " ! & % '()* hsu-07hc03/r2 hsu-09hc03/r2 hsu-12hc03/r2 hsu-22hd 03/r2 h 2sm - 14 h c 03/r2 h 2sm - 18 h c 03/r2 hsu-14hr03/r2 hsu-18hr03/r2 ##($ # & ") * + ,$&&-% .% ' ' ' ' ' ' ' / ' ' ' 0 ' ' ' ,$&-% .% 1 &-% ,$&-% 1 &-% 1 &-% .% ,$&-% .% 1 &-% .% ($ + ($ '" * 23+-2 4 ( 52-('67(8+97: '2 3(2-6(3;'4 +'6 (74 2-2 4 6-( -(2<=( % ># * ,#?# #> #"> ) # " * %(# ># $* 0 7@ 7@% % " ># ' , > #4 02 0a% % 3# ## b #> % 0% (c## >##> " > >#% /% - c # * #>#) " ## ! "##% % 3)##> #"# #% % ( #c ,# ?# d# # # e * % % -> f g ) # # #% %(#> > " % %(#)# ># #g #,f 3,f ## ) # % ) ># > & hsu-07hc03/r2 hsu-09hc03/r2 # & # & # & # & 0 ' hsu-12hc03/r2 hsu-22hd03/r2 h 2sm - 1 4 h c 03/r2 h 2sm - 1 8 h c 03/r2 hsu-14hr03/r2 hsu-18hr03/r2 / b# b# ## % %- b## 246 '663 - : (24 @27 %- b.+7< %- b@27((- %- b(234 0%- b3(( /%- b36'h %- b4+( 6@@ %- b28+3+2 :(24 %(234 %6-( d 246 '663 b@27 %'36'h dg ! % %4+( d 4+( 67 4+( 6@@ % ((4 # # * %'6-( *#)2 * 2 , -+32:% 2 $ * 0%- b'6-( /%- b+<723(7-+7< %- b6.( 6@4 %- b4(% %- b'36'h %- b4+( 6@@ %4( # #% %@27 e ###e #& %6.( 67 6@@ d #b) ##% %3(( ") # % 36. (- + 246 0%.+7< /%(4 "gbd# %6 g gbd# 7642&ij3 ) " b# b # , # > &- b28+3+2 :(24 # b6.( 6@4 # b36'h% ij22 # # " * # *#) *#) c # # >% i j3 ## *") * # # " b# b # % !#g ' # ## ) !edb # c # > # ## !>,f g g# ) #& >* '36'h k2kkk# % kkkk"g! %' # * # b % #>* ! >,# % - c # "! (4lk2kkk#g, ##f g !% ' g - c # e ## " , > * ## " * 3'-%2 , ee, ##% ' g b# b# ## ##f !#f # # #" * !!b # # #> g ) ") & %- b## 246 '663 - : (24 @27 %- b.+7< %- b@27((- %- b(234 0%- b3(( /%- b36'h %- b4+( 6@@ %- b28+3+2 :(24 %.+7< %6-( d 246 '663 b@27 %'36'h dg ! % %4+( d 4+( 67 4+( 6@@ % ((4 # # * % %'6-( *#)2 * l , 2 -+32:% 2 $ * % 0%- b'6-( /%- b+<723(7-+7< %- b6.( 6@4 %- b4(% %- b'36'h %- b4+( 6@@ %4( # #% %@27 e ###e #& %6.( 67 6@@ d #b) ##% %3(( ") # % 36. (- + 246 0%(4 "gbd# /%6 g gbd# %36'h >f > b -+32:% 7642&ij3 ) " b# b # , # > &- b28+3+2 :(24 # b6.( 6@4 # b36'h% ij22 # # " * # *#) *#) c # # >% i j3 ## *") * # # " b# b # % - c # e ## " , > * ## " * 3'-%2 , ee, ##% !#g ' # ## ) !edb # c # > # ## !>,f g g# ) #& >* '36'h k2kkk# % kkkk"g! %' # * # b % #>* ! >,# % - c # "! (4lk2kkk#g, ##f g !% ' g @ # ## 3# >d# * # ?b" #> # )m > , % ' # c # d# ?# * # " # ## 7#g #l#f #?#% ' #!b " ! * " " c" ,> #e ># * # ? ##f # ## #> "% ! ') % # # i #j ! ! " ) kkb>g% ! # a" f ) ### knk kk # )m ) $ %! !" &'# ( # * * ee ) e # c #/ % # # e # 1 d )% ## " ## " # )m # 1 % (# o #f eb ### 1## )#% )m # b# c #f !bf % ' ') &! *! + # "# * ## #," ) #) * % # ' # # "# * # ## , " # # * "# * # d # # # 1## )# # # * f ## # , " #) * 67 6@@) ## #e e * % & 36 (- + 246 ij## ## ij !# ## & &, - & % - " * >* % >* 67 6@@%3 ## !% ( ##" e # b% ia 4d#j ( # ## * # ## #% ij ##" >* 6-(%' # * # #" ># ) #& 246 '663 - : (24 @27 3 ## e, # #% # b kk246kk@27% i j@27 >* @27%' # * e ## #e # ># ) #& 3 ## e, e ###e # #% 7&246 ,# > #@27% >* 67 6@@ * 3'-!% 4# # # # ## ) %("#* e , % ( + , % - . " ! % # /+0 10 & 7& + % . " 2 3 . 0 10 " % 4 / 45#0.# ) / 4 .6 45#0 7 8 . & 36 (- + 246 >* 6-(%' # * ## " ># ) #& # & & & -. / '663 e % (24 e - : e ?b !m# % ij !# ## >* 67 6@@%3 ## !% ( ##" e # bia 4d#j% ( # ## * # ## #% ij ##" 246 '663 - : (24 @27 3 ## , ##" # 3'-% # b ## #% i j >* 4(% (&#!+! 61' + ! ! a (&#!+! 61' + ! !, a 3 ## p) ," #! d%#3'-% >* @27%' # * e ###e # ># ) #& ij * #e ###e # 3 ##" e ## # 3'-% 7 . d'"! + ! 6 !+ a + ! 6 " ' ! )!" * ) ( " 2ef + ( g (" + " % + 5 ! % . 0 10 " (" #") * ! #% # e# % ' ## m>g 4%n ' a#% 2)e#% ##d," #- : e% & )0+( ' ( 4 ##" "#* e > , # # #% " )!@)% '663 (24 '663 (24 2$% 2$%/ 2$% 2$%0 2$%/ . 9 - *00. : ! . ! " ! " & 9 - *00. ! . ! " ! " & # : + . % - ;)* <=>)* " % /" &. % 3 %: , . <=>)* 7 *00 )1+ >* 67 6@@% * 3'-!%4# # # # ## ) %( "#* e , % # " ! ! - ! < . + ?+5# " % + ! : % *00298 .: % # # * ! . % " - ! e!d > # ## g # * df #b# ! @)% 2g ## * #" g# df #b# !i j >* .+7< "#* e e, ) # @)% >* .+7<# * "g% 2>b>gi ## j & & , - % ! % " % 45 $ % 3 - ! ! # /+ 2 ( # ## * # ## #% ' 2 3 ! . (##" , 3'-% ij * ##4+( >* 4+( >#4+( % '#edf >* # b ># ) #& 67 6@@ 67 6@@ 4+( 67 4+( 6@@ 4+( 676@@ > q #4+( # #i4+( 674+( 6@@j 67 6@@ d, #% i ja#4d# >* 6 r s% '#edf >* % #>* ! >,# % '#edf >* # b % #>* ! >,# % ( , 3'-% #g ! % ij' " * #e - c #"g! >* (4 " k67k k6@@k#g, ## 4 #&3 ## 8! 8 i4+( 674+( 6@@j ( # ###d## ## #% #4+( >* 4+( e e ! f #4+( # d % ' g - c # > # "# * #> !% ( ## " * # # #4+( ) * >* (4# c # # e# f % 3 & 3 & + ' 2 3 ! . + " *2 67 6@@ 67 6@@ 4+( 67 4+( 6@@ 4+( 676@@ > q * - . % 4 ij >* 4+( >#4+( % # /+0 =0@0 @ " i j@g * #4+( 67 . ! " * - . 'a . ! " * - . 'a , bc! + " *2 5/ ! ,/ , ?0 ij' " * #4+( 67 2 3 . # /+ @0 @ . - @0@ # 4 ! d! d i0j@g * #4+( 6@@ % - @ # /+0 @ i/j' " * #4+( 6@@ 2 3 . +# 8@0@ # 4 d! d . # /+ ! - # /+ & @ #(234 ij 67 6@@% ij edk(234k kk ! # # , e# " * !!% i jae k(234kl " * !! # % () ## # # # #) ) ## # f >#"" e ##b * # b>c > b # * #e b" # % (a(+74 6-''+9723@7'+672+(746(234 0 @ #) & %%% & & 3 * % . ! . - + . 8 3 % % - # # % / # 6 0 , # ' # ' ' / ' '674+76 '674+76 246 246 '663 (24 * ! b<)* % % ! b<)* @ # >& '()*8 , " > % # ! @,@. . % ! @?@ % , % 8 % * . / 4 & & 5 . ! - ++, " ++,. - " $ '! 3 ++,. "')* 2 3 ! . % " ( ! . . " - " $ & . '! 3 ++,. "b) * 2 3 ! . b)* " <! . " ')* " " <! 3 . - " # %b ' ' ' ! . " ! - ! < * 3 . " ! " . ".< 3 . " ! 7& + 5#0. " ++, + 5 . $ " ++, ++, 57(! ! ! 5 ')* 5 ')* 6 , 6 , b)* b)* 57<! ! ! 5 ')* ! ++, ++, @)% @)% & -" # # 2 ! $ + ! . % ? $ % % 8 $ $ ! - : @# # ! $ ! - % e ! % 2 3 . * " . - @@- ! 6 - " " 8 .: @# , / 0 & * #" " ## 2>g# # 5 ! 7 " 2 % ! . . , 5 % * * , 5 ! , bb. " ' * #" , ## - " " "- 'g# # * ( # #f , d # # #" ## * l c# # * # e % 7642& @ " ##2 # / #% 3 " > # #> d f e# %2#f e # & ( # * ' ) % - , . . + # f+ " g . '>: f+7 %& " g f+ " g f ! % g f+ % g f+7 % g ' # > * @ * + ! ! , 7 6 & / % * . ! ! < % * ! . h < 2 ! 2 b=< - " ! . " + " % % 2 + " 7 . + - 2 *0029. 7 + f+ " ! g f+7 g f+ "- %& g ! " 2 # e e" ) ) % 5 % =;i*jc 2 1. indicatori modalit? operativa: 2. indicatore direzione del flusso d'aria alto/basso. 3. indicatori velocit? del flusso d'aria: 4. indicatore funzione health. 5. indicatore funzione sleep. 6. indicatore lock (blocco tasti). 7. indicatore modalit? timer on. 8. indicatore funzione riscaldamento ausiliario. 9. tasto health per impostare la funzione health (salute). 10. tasto mode per selezionare la modalit? operativa desiderata. ad ogni pres- sione del tasto, la modalit? varia come segue: 11. tasto clock per impostare l'orologio. 12. tasto timer per impostare le funzioni "timer on", "timer off", "timer on-off". on: il climatizzatore si avvia dopo il periodo impostato. off: il climatizzatore si arresta dopo il periodo impostato. 13. tasto reset premere questo tasto con un oggetto appuntito per ripristinare l'impostazione iniziale del telecomando, ad esempio in caso di malfunzionamento dovuto a una sorgente elettromagnetica. 14. tasto code per selezionare il codice a o b. si prega di selezionare a. 15. indicatore codice a o b. t asti e display del telecomando bassa media alta auto auto raffreddamento deumidificazione riscaldamento ventilazione auto raffreddamento deumidificazione riscaldamento ventilazione 3 16. indicatore invio segnale. 17. indicatore modalit? power/soft. 18. indicatore temp (visualizza la temperatura impostata). 19. indicatore clock (orologio). 20. indicatore modalit? timer off. 21. tasti temp (impostazione temperatura) la temperatura indicata aumenta di 1? ad ogni pressione. la temperatura indicata diminuisce di 1? ad ogni pressione. 22. tasto fan per regolare la velocit? del flusso d'aria: bassa, media, alta, auto. 23. tasto on/off per accendere e spegnere il climatizzatore. 24. tasto sleep per selezionare la modalit? notturna sleep (spegnimento auto- matico). 25. tasto swing per modificare la direzione del flusso d'aria verticalmente (verso l'alto e verso il basso). 26. tasto set per confermare le impostazioni del timer e dell'orologio. 27. tasti hour (ora) per regolare l'ora dell'orologio e impostare l'orario del timer. nota: questa unit? non dispone delle funzioni relative ai punti: 6, 8, 17. uso del telecomando dopo aver acceso il climatizzatore, puntare il telecomando direttamente verso il sensore di ricezione segnali sull?nit? inter na. la distanza tra la testina di trasmissione del segnale e il sensore di ricezione non deve essere superiore ai 7 metri e non de vono esserci ostacoli. evitare di far cadere il telecomando ed evitare che venga danneggiato. se nella stanza viene installata una lampada fluorescente ad avviamento elettronico, o una lampada fluorescente di tipo a commutatore, o un telefono portatile, la ricezione dei segnali da parte del telecomando pu? essere disturbata, quindi la distan za dall?nit? interna dovrebbe essere diminuita. inserimento delle batterie inserire le batterie come illustrato. rimuovere il coperchio del vano batterie sulla parte posteriore del telecomando: premere leggermente ?nella direzione della freccia e far scorrere il coperchio. inserire le batterie: accertarsi di allineare correttamente le polarit?. richiudere nuovamente il coperchio del vano batterie. indicazione della corretta esecuzione dell?perazione: se dopo aver premuto il tasto on/off, il display del telecomando lampeggia, togliere e inserire di nuovo le batterie dopo 6 minuti. note: ? na visualizzazione completa o non chiara sul display del telecomando indica che le batterie si stanno scaricando e che quindi devono essere sostituite. ? tilizzare batterie nuove dello stesso tipo. se dopo aver sostituito le batterie, il telecomando non funziona normalmente o non funziona per niente, premere il tasto reset con un oggetto appuntito. rimuovere le batterie se l?pparecchio non viene utilizzato per lungo tempo. qualora il display riportasse ugualmente delle indicazioni dopo la rimozione delle batterie, ? sufficiente premere il tasto reset con un oggetto appuntito. ? opo la sostituzione delle batterie, il telecomando ? automaticamente impostato nel seguente modo: modalit? auto, temperatura disattiva, timer disattivo, velocit? ventilatore auto. impostazione dell'orologio quando l?pparecchio viene avviato per la prima volta e dopo aver sostituito le batterie del telecomando, l?rologio dovrebbe essere impostato come segue: 1. premere il tasto clock, sul display apparir? la scritta lampeggiante ?m?o ?m? 2. premere o per regolare l?ra esatta. ad ogni pressione del tasto, l?ra aumenter? o diminuir? di un minuto. se il tasto viene tenuto premuto, l?ra cambier? rapidamente. 3. per confermare l?ra predisposta, premere il tasto set. ?m?e ?m?smetteranno di lampeggiare, mentre l?rologio inizier? a funzionare. (am si riferisce alla mattina e pm al pomeriggio). 5 (1) avvio del climatizzatore premere il tasto on/off sul telecomando, il climatizzatore si avvia. sul display a cristalli liquidi appare lo stato di funzionamento precedente (eccettuata la modalit? timer). l'indicatore luminoso power sull'unit? interna si accende. (2) selezione della modalit? operativa premere il tasto mode; ad ogni pressione, la modalit? operativa varia come segue: arrestare il display sul simbolo della modalit? desiderata. (3) impostazione della temperatura premere gli appositi tasti temp. la temperatura indicata aumenta di 1? ad ogni pressione. se il tasto viene tenuto premuto, la temperatura impostata aumenter? rapidamente. la temperatura indicata diminuisce di 1? ad ogni pressione. se il tasto viene tenuto premuto, la temperatura impostata diminuir? rapidamente. selezionare la temperatura desiderata. (4) selezione della velocit? del ventilatore premere il tasto fan; ad ogni pressione, la velocit? del ventilatore varia come segue: il climatizzatore funzioner? con la velocit? del flusso d'aria selezionata. quando fan ? impostato su ?uto? il climatizzatore regola automaticamente la velocit? del ventilatore in base alla temperatura ambiente. (5) arresto del climatizzatore premere il tasto on/off, il climatizzatore si arresta. tutti gli indicatori luminosi sull'unit? interna si spengono. i deflettori si chiudono automaticamente. la funzione raffreddamento inizia quando la temperatura ambiente ? pi? alta di 2 c rispetto a quella impostata. al raggiungimento della temperatura impostata l?nit? funzioner? in dry - deumidificazione. debole flusso d?ria. t emperatura impostata t emperatura impostata +2 c funzionamento raffreddamento, deumidificazione, riscaldamento note: in modalit? deumidificazione, quando la temperatura ambiente supera di 2? la temperatura impostata, l?nit? inizia a funziona re a intermittenza in modalit? raffreddamento con velocit? del ventilatore bassa, indipendentemente dalla velocit? del ventilatore impostata. in modalit? riscaldamento, l?ria calda viene emessa solo dopo un breve periodo di tempo per evitare l?ffetto ?old-draft?(a ria fredda). il telecomando ? in grado di memorizzare l'impostazione di ciascuna modalit? operativa. semplicemente selezionare la modalit? operativa desiderata e il climatizzatore si avvier? con l'impostazione della volta precedente (la modalit? timer deve essere r eimpostata). auto raffreddamento deumidificazione riscaldamento ventilazione bassa media alta auto 6 funzionamento auto, ventilazione (1) avvio del climatizzatore premere il tasto on/off sul telecomando, il climatizzatore si avvia. sul display a cristalli liquidi appare lo stato di funzionamento precedente (eccettuata la modalit? timer). l'indicatore luminoso power sull'unit? interna si accende. (2) selezione della modalit? operativa premere il tasto mode; ad ogni pressione, la modalit? operativa varia come segue: arrestare il display sul simbolo della modalit? auto o v entilazione. in modalit? auto, il climatizzatore seleziona automaticamente la modalit? operativa pi? appropriata a seconda della temperatura ambiente. (3) selezione della velocit? del ventilatore in modalit? ventilazione, premere il tasto fan; ad ogni pressione, la velocit? del ventilatore varia come segue: il climatizzatore funzioner? con la velocit? del flusso d'aria selezionata. (4) arresto del climatizzatore premere il tasto on/off, il climatizzatore si arresta. tutti gli indicatori luminosi sull'unit? interna si spengono. i deflettori si chiudono automaticamente. note: ? n modalit? ventilazione, il funzionamento auto fan e la modalit? sleep non sono disponibili. inoltre, non ? possibile imposta re la temperatura ambiente. il telecomando ? in grado di memorizzare l'impostazione di ciascuna modalit? operativa. semplicemente selezionare la modalit? operativa desiderata e il climatizzatore si avvier? con l'impostazione della volta precedente (la modalit? timer deve essere r eimpostata). auto raffreddamento deumidificazione riscaldamento ventilazione bassa media alta 7 regolazione della direzione flusso d?ria a vvertenze: consigliabile non mantenere l?letta verticale orientata verso il basso per lungo tempo nella modalit? raffreddamento o deumidificazione, altrimenti potrebbe formarsi dell?cqua dovuta alla condensa. quando il tasso di umidit? ? elevato, si pu? formare della condensa in corrispondenza della bocca di ventilazione se tutte le alette orizzontali sono regolate verso sinistra o destra. suggerimenti: dato che l?ria fredda scende verso il basso nella modalit? raffreddamento, ? consigliabile regolare orizzontalmente il flusso dell?ria per una migliore circolazione. dato che l?ria calda sale verso l?lto nella modalit? riscaldamento, ? consigliabile regolare verso il basso il flusso dell? ria per una migliore circolazione. fare attenzione a non prendere freddo quando l?ria fredda scorre verso il basso. d?state ? dannoso per la salute passare dentro e fuori da luoghi dove la differenza della temperatura ? superiore a 7?. una differenza di temperatura di 3-5? ? sufficiente ad allontanare il senso di stanchezza. inoltre, ci? riduce il carico ed i l consumo elettrico dell?pparecchio. quindi nella modalit? raffreddamento ? consigliabile impostare una differenza di temperatura di 3-5 ? tra la temperatura interna e quella esterna. funzione swing dopo aver selezionato la modalit? operativa, l?letta verticale si aprir? automaticamente in base alla modalit? operativa selez ionata. v erso l?lto e basso (tramite telecomando) premere il tasto swing, l?letta verticale osciller? all?nterno della gamma indicata in figura. premere nuovamente il tasto swing per bloccarla in una posizione fissa. v erso sinistra e destra (manuale) spostare l?letta orizzontale per regolare il flusso verso destra o verso sinistra. vedi figura sottostante. 8 funzione notturna sleep premendo il tasto sleep prima di andare a dormire, il climatizzatore funzioner? in modo da rendere il vostro sonno pi? confortevole nella modalit? selezionata. utilizzo della funzione sleep dopo aver avviato l?nit?, selezionare la modalit? operativa desiderata e premere il tasto sleep assicurandosi di aver regolato l?rologio in modo corretto. funzionamento in modalit? raffreddamento e deumidificazione un'ora dopo l?vvio della funzione sleep, la temperatura ambiente aumenter? di 1? rispetto alla temperatura impostata. dopo un'altra ora, la temperatura ambiente aumenter? di un altro grado. mantenendo questa stessa temperatura, l?nit? funzioner? per altre sei ore e poi si arrester? automaticamente. la temperatura ambiente ? pi? alta rispetto a quella impostata in modo che non sia troppo freddo durante la notte. funzionamento in modalit? riscaldamento un'ora dopo l?vvio della funzione sleep, la temperatura ambiente si abbasser? di 2? rispetto alla temperatura impostata. dopo un'altra ora, la temperatura ambiente si abbasser? di altri due gradi. dopo altre 3 ore, la temperatura ambiente si alzer? di 1?. mantenendo questa stessa temperatura, l?nit? funzioner? per altre tre ore e poi si arrester? automaticamente. la temperatura ambiente ? pi? bassa rispetto a quella impostata in modo che non sia troppo caldo durante la notte. funzionamento in modalit? auto l unit? funzioner? con la funzione sleep in base alla modalit? operativa scelta automaticamente dal sistema. funzionamento in modalit? ventilazione la funzione sleep non ? disponibile. inizio funzione sleep fine funzione sleep temperatura impostata arresto circa 6 ore 1 ora 1 ora modalit?cool, dry aumento di 1 c aumento di 1 c inizio funzione sleep fine funzione sleep temperatura impostata arresto modalit?heat 1 ora 1 ora 3 ore circa 3 ore aumento di 1 c diminuzione di 2 c diminuzione di 2 c 9 modalit? timer on - timer off regolare correttamente l?rologio prima di utilizzare la modalit? t imer. e' possibile far avviare o arrestare automaticamente il climatizzatore prima di alzarsi la mattina, o prima di rientrare a casa da fuori, o dopo essere andati a letto la sera. (1) avvio dell?nit? e selezione della modalit? operativa desiderata dopo aver avviato il climatizzatore, il display a cristalli liquidi visualizzer? la modalit? operativa impostata. l'indicatore luminoso power sull'unit? interna si accende. (2) selezione della modalit? timer premere il tasto timer; ad ogni pressione, la modalit? timer varia come segue: selezionare la modalit? timer desiderata (timer on oppure timer off), o lampeggiano sul display. (3) impostazione del timer premere i tasti hour per l?mpostazione dell?rario ad ogni pressione, l?ra indicata aumenta di 10 minuti. se il tasto viene tenuto premuto l?ra cambier? rapidamente. ad ogni pressione, l?ra indicata diminuisce di 10 minuti. se il tasto viene tenuto premuto l?ra cambier? rapidamente. l ?ra verr? visualizzata sul display a cristalli liquidi. e?possibile impostare il timer nell?rco di 24 ore. am si riferisce alla mattina e pm al pomeriggio. (4) conferma dell?mpostazione dopo aver impostato correttamente l?rario, premere il tasto set per confermare. o sul telecomando smettono di lampeggiare. ora visualizzata: l?nit? si avvier? (timer on) o si arrester? (timer off) all?ra x e x minuti. l'indicatore luminoso timer sull'unit? interna si accende. (5) disattivazione del timer premere il tasto timer diverse volte finch? la modalit? timer scompare dal display. suggerimenti: dopo aver sostituito le batterie, o in caso di interruzione di corrente, ? necessario reimpostare il timer. il telecomando possiede una funzione memoria, quindi, quando si utilizza la modalit? timer la volta successiva, dopo aver selezionato la modalit? operativa ? sufficiente premere il tasto timer se l?mpostazione del timer ? uguale alla volta preceden te. vuoto 10 modalit? timer on/off regolare correttamente l?rologio prima di utilizzare la modalit? t imer. (1) avvio dell?nit? e selezione della modalit? operativa desiderata dopo aver avviato il climatizzatore, il display a cristalli liquidi visualizzer? la modalit? operativa impostata. l'indicatore luminoso power sull'unit? interna si accende. (2) selezione della modalit? timer premere il tasto timer; ad ogni pressione, la modalit? timer varia come segue: selezionare la modalit? timer desiderata (timer on-off), lampeggia sul display. (3) impostazione dell?rario per timer on premere i tasti hour per l?mpostazione dell?rario ad ogni pressione, l?ra indicata aumenta di 10 minuti. se il tasto viene tenuto premuto l?ra cambier? rapidamente. ad ogni pressione, l?ra indicata diminuisce di 10 minuti. se il tasto viene tenuto premuto l?ra cambier? rapidamente. l ?ra verr? visualizzata sul display a cristalli liquidi. e?possibile impostare il timer nell?rco di 24 ore. am si riferisce alla mattina e pm al pomeriggio. (4) conferma dell?mpostazione per timer on dopo aver impostato correttamente l?rario, premere il tasto timer per confermare. sul telecomando smette di lampeggiare, allo stesso tempo inizia a lampeggiare. ora visualizzata: l?nit? si avvier? all?ra x e x minuti. (5) impostazione dell?rario per timer off seguire la stessa procedura che per ?mpostazione dell?rario per timer on? (6) conferma dell?mpostazione per timer off dopo aver impostato correttamente l?rario, premere il tasto set per confermare. sul telecomando smette di lampeggiare. ora visualizzata: l?nit? si arrester? all?ra x e x minuti. disattivazione del timer premere il tasto timer diverse volte finch? la modalit? timer scompare dal display. vuoto 11 funzione health (1) avvio del climatizzatore premere il tasto on/off sul telecomando, il climatizzatore si avvia. selezionare la modalit? operativa desiderata. (2) funzione health premere il tasto health, sul display del telecomando appare " "; lo ionizzatore si avvia e la funzione health ? attivata. (3) disattivazione funzione health premere nuovamente il tasto health, il simbolo della funzione scompare e la funzione ? quindi disattivata. breve presentazione della funzione health lo ionizzatore pu? generare una grande quantit? di ioni negativi per bilanciare efficacemente la quantit? di ioni positivi e ioni negativi nell?ria, neutralizzare i batteri e accelerare il deposito di polveri, e quindi purificare l?ria dell'ambiente. funzione auto-restart grazie alla funzione auto-restart, nel caso si verifichi un?nterruzione di corrente mentre il climatizzatore ? in funzione, l apparecchio riprender? automaticamente a funzionare con le stesse impostazioni non appena torna la corrente. note: quando si verifica un?nterruzione di corrente mentre il climatizzatore ? in funzione, se il climatizzatore non verr? utilizzat o per un lungo periodo di tempo, si consiglia di staccare l?limentazione per evitare che il climatizzatore riprenda a funzionare quando torna la corrente, oppure premere il tasto on/off quando torna la corrente. ist ha023 rev. 00-2004 |
Price & Availability of HSU-14HR03R2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |